The Best of Sansui

Text Box: Looking for Sansui Brochures, Bulletins, or Manuals (schematics included)?  Or, need NOS parts?  Visit OBS, Inc, Woodang.net, or back to the Best of Sansui
 


 

 

Sansui, and Beyond
 |  Latest Topics
 
 
 


Reply
  Author   Comment  
Kenny
Reply with quote  #1 
Hi,

I just receive my AU4400 from the repair shop. He fixed my transistor firing problem.

Unfortunately he did not have the service manual and could not set the bias for my AU4400 after the repair.

I suspect it is the trimpot on the mainboard and one of the two micron resistors but no details of the values to adjust the trimpot to.

Can anyone assist with the details?

Thank you in-advance to any help in the matter!


Kenny
Reply with quote  #2 
Discovered one channel had setting of approximately 49mV while the other was about 15mV.

Reset both to about 15mV and been working fine after replacing all the electrolytics except the large 2200uF 50V capacitor on the main amplifier board.

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.